Hem » MOTOR » MOTORDELAR » Cams 551Gear 99-06
SNABBA LEVERANSER
30 DAGARS ÖPPET KÖP
PERSONLIG SUPPORT
SVERIGE FRAKT 99 KR
Cams 551Gear 99-06

Cams 551Gear 99-06

S&S Cycle
Artnr: 09250742
SEK 12 149 kr Ord. Pris (SEK 13 499 kr)
-10% På allt från S & S Cycle t.o.m. 2025-01-28
Camshaft Set 551G Gear-Driven
Lagerstatus: Leveranstid 3-5 dagar

Behöver du hjälp?

Ring oss på 0499 - 131 70

Eller maila till support@mtlcustom.se

Beskrivning

551G Gear Drive Camshaft Kit

  • Designed for engines with 96 to 106 CID and 9:1 to 9:9 compression, this is a bolt-in cam set for stock or mildly modified touring bikes
  • Reverses the rear cam's direction of rotation, providing additional operating clearance between cam lobes making higher cam lifts possible
  • More power across the rpm range, with improved low and midrange torque, strongest from 1,000-4,000 rpm
  • Increases valve timing accuracy by eliminating timing chain lash and loosely fit stock chain
  • Material must be removed from inner surface of the stock gear cover to install
  • A hydraulic press and other professional level tools are required for installation
  • Cam bearings and gaskets must be replaced when installing new cams
  • S&S recommends that adjustable pushrod/cover kit be used
  • Not recommended for compression ratios of 10:1 or greater
  • Kit includes inner gears, outer gears, inner and outer bearings, gaskets and instructions
  • Made in the USA
  • Installer must check coil bind, valve to valve clearance, and valve to piston clearance.
  • Due to the inherent characteristics of gear drives, you may experience more valve train noise.


    • '99-'04 models require high-lift springs. Not for '06 Dyna.

    Specifikationer

    Artnr: 09250742

    Passar dessa hojar

    Andra produkter från samma kategori
      Tillbaka