• Made in the USA
  • S&S 4.000" Big-Bore Cylinders, Piston Kits, S&S 585 Easy Start® Cams, S&S Quickee Pushrods, TC3 Cam Support Plate, TC3 Oil Pump, and Precision Hydraulic Tappets are included in this kit
  • S&S Cylinder
  • 2x S&S 4.000" bore cylinders
  • Low friction ductile cast iron liner
  • Bolt in
  • No maching, balancing, or splitting the crankcase
  • Can be used with stock heads
  • Increase displacement from 88 ci to 100 ci
  • Piston Kit
  • 2x 4.000" pistons for front and rear
  • 2x 0.927" piston pins
  • 4x Piston pin clips with installation tool
  • 2x Ring packs which includes the top, second, oil rail and expander rings
  • Provides 10.5:1 compression ratio
  • S&S 585 Easy Start® Cam Specifications
  • Intake: Open 20° / Close 45° / Duration at 0.053" 245° / Valve Lift 0.585"
  • Exhaust: Open 60° / Close 20° / Duration at 0.053" 260° / Valve Lift 0.585"
  • S&S Quickee Pushrods
  • Adjustable with chrome tubes
  • TC3 Cam Support Plate and TC3 Oil Pump
  • Machined from aluminum forgings
  • Ensures consistent oil pressure and engine longevity
  • Precision Hydraulic Tappets
  • Close tolerances for low leak down rates
  • Reduced valve train noise from start to shut down
  • Not for '06 Dyna.
  • Not compatible with S&S 79 cc Super Stock® heads.
  • Not recommended for Tri-Glide or other three wheel models due to lugging nature of these bikes.
  • '99-'04 Twin Cams will require the additional purchase of valve spring kit (sold separately).


  • Pinion shaft runout must be less than .003" to use gear drive cams." />
    1. Hem »
    2. MOTOR
    3. » MOTORDELAR
    4. » KOLV- & CYLINDERKIT
    5. » Produkt

    Power Pk Gear 99-06 Slvr

    Artnr: 09040027
    SEK 54 829 kr
    Lagerstatus: Lång leveranstid, från ca 30 dagar

    Behöver du hjälp?

    Ring oss på 0499 - 131 70

    Eller maila till support@mtlcustom.se

    Beskrivning

    100" Power Package Engine Performance Kit

  • Made in the USA
  • S&S 4.000" Big-Bore Cylinders, Piston Kits, S&S 585 Easy Start® Cams, S&S Quickee Pushrods, TC3 Cam Support Plate, TC3 Oil Pump, and Precision Hydraulic Tappets are included in this kit
  • S&S Cylinder
  • 2x S&S 4.000" bore cylinders
  • Low friction ductile cast iron liner
  • Bolt in
  • No maching, balancing, or splitting the crankcase
  • Can be used with stock heads
  • Increase displacement from 88 ci to 100 ci
  • Piston Kit
  • 2x 4.000" pistons for front and rear
  • 2x 0.927" piston pins
  • 4x Piston pin clips with installation tool
  • 2x Ring packs which includes the top, second, oil rail and expander rings
  • Provides 10.5:1 compression ratio
  • S&S 585 Easy Start® Cam Specifications
  • Intake: Open 20° / Close 45° / Duration at 0.053" 245° / Valve Lift 0.585"
  • Exhaust: Open 60° / Close 20° / Duration at 0.053" 260° / Valve Lift 0.585"
  • S&S Quickee Pushrods
  • Adjustable with chrome tubes
  • TC3 Cam Support Plate and TC3 Oil Pump
  • Machined from aluminum forgings
  • Ensures consistent oil pressure and engine longevity
  • Precision Hydraulic Tappets
  • Close tolerances for low leak down rates
  • Reduced valve train noise from start to shut down
  • Not for '06 Dyna.
  • Not compatible with S&S 79 cc Super Stock® heads.
  • Not recommended for Tri-Glide or other three wheel models due to lugging nature of these bikes.
  • '99-'04 Twin Cams will require the additional purchase of valve spring kit (sold separately).


  • Pinion shaft runout must be less than .003" to use gear drive cams.

    Specifikationer

    Artnr: 09040027
    1 2 3 4 5
    (0/5) Bli först med att betygsätta.