• Formed threads
  • Cold Formed Head
  • Reusable
  • Forged Roller Rocker Arms
  • Forged from 8620 steel for greater strength
  • Designed using Finite Element Analysis (FEA)
  • Rollers eliminate thrusting on valves for decreased wear on the valve train
  • Rocker geometry is better suited to high lift cams
  • Larger surface area on the thrust surfaces reduces wear on the heads
  • Bushings are 50% longer than stock, increasing time between rebuilds
  • Compatible with stock or S&S CNC heads
  • Oil is sprayed directly on the valve springs, reducing potential for breaking a valve due to over-heating (stock rockers tend to oil the rocker boxes, not the valves)
  • 1.640 Ratio
  • Capable of .650" max Valve Lift
  • Serviceable and rebuildable for generations of durabilty
  • A must have for cams with .550" or greater lift
  • EU: 1378,95 MPa ultimate tensile strength
  • EU: 1,43 cm 12-point head with integral washer
  • EU: Capable of 1,65 cm max Valve Lift
  • EU: A must have for cams with 1,40 cm or greater lift


    • Kit Includes: • 4x Rocker Arm Shafts • 8x Rocker Arm Stud Kit • 8x Head Bold Kit • 4x Forged Roller Rocker Arms" />
    1. Hem »
    2. MOTOR
    3. » MOTORDELAR
    4. » Produkt
    SNABBA LEVERANSER
    30 DAGARS ÖPPET KÖP
    PERSONLIG SUPPORT
    SVERIGE FRAKT 99 KR

    S&S Cycle

    Rocker Arm Guardian Kt M8

    Artnr: 09270042
    SEK 12 889 kr
    Slut i lager

    Ange din e-postadress för att bevaka denna artikel. Du blir meddelad när artikeln åter är i lager.

    a8RhF
    Kod från Captcha-bild:

    Lagerstatus: Ej i lager

    Behöver du hjälp?

    Ring oss på 0499 - 131 70

    Eller maila till support@mtlcustom.se

    Beskrivning

    Rocker Arm Guardian Kit

  • Rocker Arm shafts, Rocker Arm Stud Kit, Head Bolt Kit and Performance Roller Rocker Arms are included in this kit
  • Rocker Arm Shafts
  • Replace broken or worn OEM pieces with stronger, more durable S&S performance parts
  • Direct replacement for stock parts
  • Hardened and surface ground for ultimate precision and durability
  • Rocker Arm Stud Kit
  • Extend the life of your cylinder heads
  • Prevent damage to Rocker Arm Towers
  • Install studs and safely re-torque nuts
  • Black Oxide Finish
  • 12 pt Nuts
  • Head Bolt Kit
  • Heat Treated 8640 Steel
  • 200,000 psi ultimate tensile strength
  • 14% increases in strength over stock
  • Stronger material than stock Head bolts
  • Durable Black Oxide Coating
  • 9/16" 12-point head with integral washer
  • Formed threads
  • Cold Formed Head
  • Reusable
  • Forged Roller Rocker Arms
  • Forged from 8620 steel for greater strength
  • Designed using Finite Element Analysis (FEA)
  • Rollers eliminate thrusting on valves for decreased wear on the valve train
  • Rocker geometry is better suited to high lift cams
  • Larger surface area on the thrust surfaces reduces wear on the heads
  • Bushings are 50% longer than stock, increasing time between rebuilds
  • Compatible with stock or S&S CNC heads
  • Oil is sprayed directly on the valve springs, reducing potential for breaking a valve due to over-heating (stock rockers tend to oil the rocker boxes, not the valves)
  • 1.640 Ratio
  • Capable of .650" max Valve Lift
  • Serviceable and rebuildable for generations of durabilty
  • A must have for cams with .550" or greater lift
  • EU: 1378,95 MPa ultimate tensile strength
  • EU: 1,43 cm 12-point head with integral washer
  • EU: Capable of 1,65 cm max Valve Lift
  • EU: A must have for cams with 1,40 cm or greater lift


    • Kit Includes: • 4x Rocker Arm Shafts • 8x Rocker Arm Stud Kit • 8x Head Bold Kit • 4x Forged Roller Rocker Arms

    Specifikationer

    Artnr: 09270042
    1 2 3 4 5
    (0/5) Bli först med att betygsätta.
    Andra produkter från samma kategori
      Tillbaka